Only one kit required per vehicle; comes with parts to emulate BOTH exhaust valves.
If you want to remove the active exhaust valves on your Dodge or Chrysler vehicle, you need a valve simulator to prevent the Check-Engine light and diagnostic trouble codes.
Here is the simplest, fully electronic solution! Other options on the market are purely mechanical; require re-using the valves and mounting them to a dummy plate.
Installation below or reference the Youtube video:
Installation:
1: Crawl under vehicle and unplug both active exhaust valves.
2: Plug in the Inactive Exhaust modules. Secure in place with a zip-tie.
3: That's it! You can leave the valves in place if you have a stock system and just want the valves open all the time. Or you can remove them completely - even sell them!
Great for those that:
- just want the valves open full-time
- want to remove or disable "noisy valves" as it is common for them to rattle
- have faulty valves and don't want the expense of replacing them
installing aftermarket exhaust and are completely removing the valves
This kit contains two parts - one is the inactive exhaust module, with an automotive-grade microprocessor that communicates with the vehicle to make it think that the valves are installed and functioning properly. The other part is a dummy waterproof connector to keep the second valve's plug from corrosion.
Works on all systems used in Chargers, Challengers and 300's from 2015 to present.
Proudly made in the USA!
